Understanding the EDR1RXD1 and W10295370A Water Filter 1 for Whirlpool Refrigerators
When it comes to maintaining your refrigerator's water and ice quality, choosing the right filter is essential. The EDR1RXD1, also widely identified by part number W10295370A and officially known as EveryDrop Filter 1, is a precision-engineered water filtration component designed for Whirlpool, Maytag, KitchenAid, JennAir, and Amana refrigerators. At Smartfiltersusa, we specialize in helping homeowners and businesses identify the correct replacement filters for their appliances, ensuring optimal flow, leak-free operation, and maximum water purity.
This article contains:
- Understanding the EDR1RXD1 and W10295370A Water Filter 1 for Whirlpool Refrigerators
- What Is the EDR1RXD1 / W10295370A Filter?
- Complete List of Compatible Refrigerator Models
- How to Identify if Your Refrigerator Uses Filter 1
- Installation and Replacement Guide
- Performance Benefits and Filtration Capabilities
- Maintenance and Care Tips
-
Frequently Asked Questions About EDR1RXD1
- 1. Are EDR1RXD1 and W10295370A the exact same filter?
- 2. Can I use Filter 2, 3, or Filter A if my fridge requires Filter 1?
- 3. How often should I replace my Whirlpool Filter 1 cartridge?
- 4. Is it safe to drink water if the filter is overdue for replacement?
- 5. Can I clean and reuse my EDR1RXD1 water filter?
- 6. What contaminants does EveryDrop Filter 1 reduce?
- 7. What should I do if the new filter causes a knocking noise or low water flow?
- 8. Where can I buy genuine and certified EDR1RXD1 / W10295370A filters?
- Conclusion
The EDR1RXD1 filter plays a vital role in reducing heavy metals, pharmaceuticals, chlorine taste, and microscopic sediment. Explore our full catalog of OEM and certified replacement refrigerator water filters to keep your dispenser running at peak performance.
What Is the EDR1RXD1 / W10295370A Filter?
The EDR1RXD1 (EveryDrop Filter 1, also cataloged as W10295370A) is Whirlpool’s high-capacity water filtration cartridge featuring Triple Filtration Technology powered by an advanced coconut-shell activated carbon core. Certified to NSF/ANSI Standards 42, 53, and 401, it is engineered to reduce up to 28 potentially harmful contaminants—including 99% of lead, pesticides, pharmaceuticals, waterborne parasites, and chlorine odor.
The cartridge features a top-mounted push-and-turn locking mechanism that seats flush into the upper right ceiling compartment or bottom grille of compatible refrigerators, preventing bypass and protecting internal ice maker solenoid valves.
| Feature Specification | Technical Details | Operational Benefit |
|---|---|---|
| Product Designation | EveryDrop Filter 1 (EDR1RXD1 / W10295370A) | Official Whirlpool Corporation OEM replacement cartridge |
| Rated Service Life | 6 months or 200–300 gallons (1,135 Liters) | Consistent contaminant reduction and optimal flow rate |
| Filtration Standards | NSF/ANSI 42, 53, and 401 Certified | Independently verified for 28+ certified contaminants |
| Interchangeable Parts | W10295370, FILTER1, 46-9930, 9930, P4RFWB | Replaces legacy and Kenmore cross-reference part numbers |
Complete List of Compatible Refrigerator Models
The EDR1RXD1 / W10295370A filter is engineered for French door, side-by-side, and bottom-freezer refrigerators from Whirlpool, Maytag, KitchenAid, JennAir, and Amana manufactured with the Filter 1 port.
Compatibility & Refrigerator Series Table
| Brand & Refrigerator Type | Compatible Model Series | Key Identifying Codes |
|---|---|---|
| Whirlpool French Door & Side-by-Side | WRF, WRS, WRX Series (e.g., WRF560SEYM, WRS325FDAM, WRX735SDBM) | Filter 1 / EDR1RXD1 Housing |
| Maytag French Door & Bottom Freezer | MFI, MFT, MFW Series (e.g., MFI2570FEZ, MFT2776DEM) | W10295370A Receptacle |
| KitchenAid Multi-Door Platforms | KRFC, KRFF, KRMF Series (e.g., KRFF305ESS, KRMF706EBS) | EveryDrop Filter 1 compatible |
| Amana & JennAir Built-in Lines | Select French door and side-by-side configurations (e.g., JFX2897DRM) | Filter 1 specification |
How to Identify if Your Refrigerator Uses Filter 1
4-Step Identification Guide
- Locate the Data Plate: Find the white or silver sticker on the upper interior sidewall or behind the crisper drawer to obtain your complete refrigerator model number.
- Examine the Installed Filter: Remove the current cartridge and inspect the printed label. Look specifically for the "Filter 1" badge, part number EDR1RXD1, or W10295370A.
- Inspect the Housing Receptacle: Filter 1 features a distinctive push-button or swing-out drop-down door located in the upper right ceiling corner.
- Cross-Reference with Support Tools: Search your appliance model number on Smartfiltersusa to verify direct compatibility before ordering.

Installation and Replacement Guide
Step-by-Step Installation Process
Step 1: Locate the Housing — The compartment is typically positioned in the upper right interior ceiling of the fresh food section.
Step 2: Release the Old Filter — Open the filter door by pressing the release tab or pushing inward until the compartment drops down, then pull the cartridge straight out.
Step 3: Unpack the New EDR1RXD1 — Remove all protective caps and packaging. Inspect the dual O-rings to ensure they are seated cleanly in their grooves.
Step 4: Insert and Engage — Align the new filter with the housing grooves, push firmly until it seats fully, and close the compartment door until it clicks shut.
Step 5: Purge & Flush the System — Dispense 2 to 3 gallons (approx. 3 to 4 minutes) of water through the door dispenser to release trapped air pockets and initial carbon fines.
Step 6: Reset Filter Indicator — Press and hold the Filter Reset or Water Filter button on the control panel for 3 seconds until the indicator light cycles back to blue/green.
Performance Benefits and Filtration Capabilities
Contaminant Reduction & Water Quality Table
| Contaminant Category | Target Impurities Reduced | Reduction Efficiency |
|---|---|---|
| Heavy Metals & Minerals | Lead, Mercury, Asbestos, Copper | Up to 99% reduction (NSF 53) |
| Taste, Odor & Aesthetics | Chlorine taste, foul odors, turbidity, sediment | 97% reduction (NSF 42) |
| Emerging Contaminants | Pharmaceuticals, BPA, Atenolol, Carbamazepine | Certified reduction (NSF 401) |
| Microbial Cysts & Parasites | Giardia lamblia, Cryptosporidium | 99.9% filtration rate |
Maintenance and Care Tips
Filter Lifespan & Quality Best Practices
| Maintenance Check | Recommended Frequency | Operational Target |
|---|---|---|
| Cartridge Replacement | Every 6 months / 200–300 gallons | Prevents carbon saturation and maintains flow rate |
| Flow Rate Verification | Monthly check | Detects sediment buildup in supply line early |
| O-Ring & Manifold Check | At every replacement | Ensures watertight connection without leaks |
| Spare Filter Storage | Cool, dry area (unopened) | Preserves activated carbon absorption capacity |
Frequently Asked Questions About EDR1RXD1
1. Are EDR1RXD1 and W10295370A the exact same filter?
Yes. EDR1RXD1 is EveryDrop's retail brand name, while W10295370A is Whirlpool Corporation's factory engineering part number. Both designate the identical Filter 1 cartridge.
2. Can I use Filter 2, 3, or Filter A if my fridge requires Filter 1?
No. Each EveryDrop filter series (Filter 1, Filter 2, Filter 3, Filter 4, Filter A) uses a distinct neck diameter and connector locking tab. They are physically not interchangeable.
3. How often should I replace my Whirlpool Filter 1 cartridge?
Whirlpool and NSF guidelines recommend replacing your EDR1RXD1 filter every 6 months or 200–300 gallons, or sooner if water flow noticeably slows down.
4. Is it safe to drink water if the filter is overdue for replacement?
While municipal water remains treated, an expired filter loses its absorption capacity, allowing chlorine, heavy metals, and trapped particulates to bypass into your drinking water.
5. Can I clean and reuse my EDR1RXD1 water filter?
No. The dense internal carbon block permanently absorbs microscopic contaminants within its pore matrix and cannot be washed or regenerated. It must be replaced.
6. What contaminants does EveryDrop Filter 1 reduce?
It is certified under NSF 42, 53, and 401 to reduce 28 contaminants, including 99% of lead, mercury, microbial cysts, pesticides, industrial chemicals, and chlorine.
7. What should I do if the new filter causes a knocking noise or low water flow?
A knocking noise indicates trapped air pockets inside the water line. Running 2 to 3 gallons of water continuously through the door dispenser expels the air and stabilizes pressure.
8. Where can I buy genuine and certified EDR1RXD1 / W10295370A filters?
You can purchase genuine, factory-tested replacement filters directly through Smartfiltersusa with guaranteed compatibility and fast delivery.
Conclusion
The EDR1RXD1 / W10295370A (EveryDrop Filter 1) represents Whirlpool’s trusted benchmark in residential water filtration, delivering clean, great-tasting drinking water and crystal-clear ice. Adhering to the recommended 6-month replacement interval safeguards your refrigerator’s internal ice maker mechanisms and ensures your household receives peak protection against harmful contaminants.
At Smartfiltersusa, we are dedicated to providing premium refrigerator water filtration solutions for Whirlpool, GE, LG, and Samsung appliances. If you have questions regarding model compatibility, message our specialist team on WhatsApp at 81 2590 8567.
